Walrus Audio Lore Reverse Soundscape Generator

Walrus Audio Lore Reverse Soundscape Generator

$299.99 USD
Skip to product information
Walrus Audio Lore Reverse Soundscape Generator

Walrus Audio Lore Reverse Soundscape Generator

$299.99 USD

New Walrus Audio Lore Reverse Soundscape Generator Guitar Effects Pedal

This item is new, in box!

From Walrus Audio:

Analog Feedback Paths:
Having two analog feedback paths allows each program to incorporate a unique mix of affected and unaffected feedback. The two feedback paths interact and build off of each other organically, offering the user a wide array of sounds and behaviors to experiment with.

V. Pitch Delay into Pitch Delay.
Program 5 features two "dueling" pitch delays, which shift the input signal up and down in complementary or opposing directions, allowing the user to create intricate harmonic patterns in the feedback network. Behaves like a sequencer at higher delay times and like a harmonizer at lower delay times. Use Feedback and Regen knobs to control various amounts of pitched delay repeats. Use the X knob to change the order of the 4th, 5th, and octave intervals that the pitch delay steps through. Experiment with short staccato notes to create some very interesting rhythmic parts!

Momentary Features:
Dive / Rise - Holding down the tap tempo switch will momentarily shift the clock rate of the pedal down or up and will hold it at that rate for as long as the switch is pressed. The direction of the dive can be changed by simply pressing bypass and tap simultaneously. A green LED over tap will indicate rise is set and a blue LED will indicate that dive is set.

Modulation: 
The Mod knob will control the amount of modulation applied to the wet signal. Holding down bypass and adjusting the Mod knob will adjust the modulation rate. The bypass LED will blink to show your set mod rate.

Specs:

  • The Lore comes coated in a muted green enclosure with Cream, Orange, brown and dark green ink with art by David Hüttner.
  • The die-cast enclosure’s exact size is 3.62” x 4.79” x 2.25” including knobs.
  • Buffered bypass.
  • Power requirements are 9VDC, center negative (300mA minimum).
  • The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
  • Daisy chain power supplies are not recommended. Power supply not included.

You may also like